61-8-209. Flashing signals. (1) Whenever an illuminated flashing red or yellow signal is used in a traffic control device, it requires obedience by vehicular traffic as follows:

(a) When a red lens is illuminated with rapid intermittent flashes, an operator of a vehicle shall stop at a marked stop line. If there is no marked stop line, an operator shall stop before entering the nearest crosswalk at an intersection. If there is no crosswalk, an operator shall stop at the point nearest the intersecting roadway where the operator has a view of approaching traffic. The right to proceed is subject to the rules applicable after making a stop at a stop sign, as provided in 61-8-344.

(b) When a yellow lens is illuminated with rapid intermittent flashes, the operator of a vehicle may proceed through the intersection or past the flashing yellow signal only with caution.

(2) This section does not apply at railroad grade crossings. Conduct of an operator of a vehicle approaching a railroad grade crossing is governed by the provisions of 61-8-347.